Engineering Test Mode

Ford Focus Electric Forum

Help Support Ford Focus Electric Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Heima

Well-known member
Joined
Feb 22, 2019
Messages
428
Don't know if anyone else has discussed this. Did a search and did not see any result.
So for more info about Engineering Test Mode, refer to this webpage https://fordfusionhybridforum.com/topic/10057-engineering-test-modedealer-test-mode/

To get into Engineering Test Mode:
  1. Enter vehicle with key.
  2. Hold down "OK" button on left hand spoke of steering wheel.
  3. Press and release the "Start" button.
  4. Continue to hold the OK button for 5 seconds, or until you see a yellow "ET" in the upper left corner of the left instrument cluster display.
  5. Use the OK button to clear the messages.
  6. Use the up and down arrow buttons on the left hand spoke to move through the different items.
  7. Exit Engineering Test Mode by pressing the Start button a second time.

I haven't explored this mode in depth, and it seems to be a subset of the information in the above link.
Probably the most useful feature is the ability to display DTC codes.

Have fun!
 
Wow! Good find. I agree that it doesn't look useful except maybe if I get the wrench or dreaded SSN and am not at home to hookup my laptop and use forscan to read the DTCs.
 
Back
Top