Page 1 of 1

DCDC Module Forscan temperature reading

Posted: Mon Aug 12, 2019 8:17 am
by thanhdaica1985
Hi all, I just want to check to see if it's normal that the MotCoolTemp reading from the DCDC Module is 226 degrees F. That's boiling water temperature. Also there's a lot of inconsistencies temperature reading between the modules. If I go to PCM Module and find the temperature for coolant going to motor, it's like around 100 degrees F. Could anyone look at their car's Forscan values and confirm if this is normal or not? Thanks.