Hi, lately there is coming no heat from my FFE 2013
When I start the car and drives the current draw reads 5kw+ and doesn't go down during the drive.
Had it at the dealer and they said it was 99% sure it was the epcu that needed to be changed. That doesn't really sound logical to me, so I just thought that i would try here if others have had the same experience/issue
I would first try to make sure all the air is purged from the heating loop. If you have a laptop you can manually force coolant pumps on and open the diverter valves. Just don't have the pumps on 100 or you may cause cavitation which will only create more problems. You can do this with forscan and a laptop or I'm sure your dealer could probably do this too.
2014 Blue Candy FFE
http://www.fuelly.com/car/ford/focus/2014/triangles/303811 (since this forum doesn't allow BBcode in sigs)