An online Ford Focus Electric Forum discussion group

It is currently Sat Jul 21, 2018 2:47 pm

All times are UTC - 8 hours

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Aug 07, 2017 1:06 am 

Joined: Mon Aug 07, 2017 12:51 am
Posts: 2
I am doing a research project related to automating the brake control in ford focus electric..i have seen other people do this and so wanted to try it myself...When you press the brake pedal, sensors are activated and the hydraulic brakes are controlled both mechanically and electrically...What I was told was that if we can generate and send your own signals related to the brake angle position sensor (which sits on top of the brake pedal assembly), then brakes can be controlled electronically to an this is what I tried and for some reason it has not worked yet...

Do any of you shed some light on can you electronically control the brakes? For example, what are the sensors connected to the Braking system module? Are there other sensors I need to emulate? I know this brake by wire is definitely possible in Ford fusion and Lincoln and people have been successful with Focus when you brake by wire, what are you actually controlling? is there a electric motor that does this job?

Any suggestions are welcome...

PostPosted: Tue Aug 08, 2017 3:51 pm 

Joined: Tue Aug 06, 2013 9:10 pm
Posts: 869
Location: Chicago Area
Search the forum for the full shop manual. Download it and that should answer your questions.

2014 Platinum White FFE (Turning in mid Dec. 2016 25,000 miles)
2013 Ingot Silver FFE
2012 Titanium ICE Focus
2014 Tesla Model S 85

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
© Ford Focus Electric Forum - part of the Group