triangles
Posts: 1056
Joined: Tue Aug 16, 2011 11:40 am
Location: Toledo, Ohio

Scangauge II and FFE

Mon Nov 26, 2018 5:18 pm

In case anyone is interested in the Scangauge. They have a special firmware just for us. Unfortunately you have to buy direct from then or if you already have yours I think you can pay something like $25 for them to update the special FFE firmware. Below is what the emailed me showing what parameters are available.
Hello. We do have a ScanGauge firmware that's compatible with the Ford Focus Electric. It's a special firmware with a special connect sequence because the Focus Electric doesn't support the standard OBDII protocols. As such, most standard gauges such as MPH, Coolant Temp, RPM, Etc don't report anything, but the following should work:

CKW - Average Battery Charger Input Power (KW)
ATR - Average Temperature Range (Degrees F)
AGE - Battery Age (Unknown Units)
OTV - Battery Charger Output Voltage (Volts)
SOC - Battery Pack State of Charge (%)
CPL - Charge Power Limit (KW)
DPL - Discharge Power Limit (Watts)
ABV - Hybrid Battery Average Battery Module Voltage (Volts)
HBC - Hybrid Battery Current (Amps)
HBV - Hybrid Battery Pack Voltage (Volts)
CTE - Hybrid Battery Remaining Charge Time - Estimated (%)
CTD - Hybrid Battery Remaining Charge Time - Displayed
HBT - Hybrid Battery Temperature (Degrees Fahrenheit)
DBC - Hybrid Battery Variation in State of Charge Between Battery Modules (%)
DBV - Hybrid Battery Variation in Voltage Measurement Between Battery Modules (%)
ETE - Hybrid EV Battery Energy To Empty (kW)

If you do want to purchase this special firmware you will need to purchase the unit directly from us just make sure you indicate you need the Ford Focus Electric firmware in the notes section at checkout of your order.
2014 Blue Candy FFE
http://www.fuelly.com/car/ford/focus/2014/triangles/303811 (since this forum doesn't allow BBcode in sigs)

Return to “News and Main Ford Focus Electric Forum”