Page 2 of 2

Re: Add original CCS Combo in car 2012-2015

Posted: Sat Apr 06, 2019 11:06 am
by Dobrinia
I installed the GFM2 block in accordance with the original diagrams and added the port of the charging line.
Errors in the diagnosis, he does not write.
But charging does not start (
Are there people on the forum who do fast charging in general? CCS1
Need your help

Image Image

Re: Add original CCS Combo in car 2012-2015

Posted: Wed Apr 10, 2019 3:36 am
by martii
I suspect you need different firmware in the car to see this.
Dobrinia wrote:I installed the GFM2 block in accordance with the original diagrams and added the port of the charging line.
Errors in the diagnosis, he does not write.
But charging does not start (
Are there people on the forum who do fast charging in general? CCS1
Need your help

Re: Add original CCS Combo in car 2012-2015

Posted: Wed Apr 10, 2019 11:29 pm
by Dobrinia
In which blocks you need to update the firmware?
I updated in SOBDM to the current version
In the GFM2 block, the firmware is the freshest
It remains to update the firmware in the battery, but I am afraid that the firmware of the batteries for 2012-2016 and 2017+ are not compatible....

Re: Add original CCS Combo in car 2012-2015

Posted: Thu Apr 11, 2019 7:51 am
by SebuĊ›
SOBDM updated on-line? What strategy do you have? What version? Can you specify the configuration from ForScan?
Battery 12-16 has different software than 17-18. Do you have a 17-18 battery? Do not update on-line because you will lose battery compatibility. The 12-16 battery does not work in a 17-18 car, but the 17-18 battery works in a 12-16 car.
My car yesterday has been fully updated, TCM, PCM, APIM, SOBDM, BCM, PSCM, BECM, ABS, = On-Line.