Has anyone done a Brake Service on their Focus Electric? I'm specifically looking for information on lubricating the Brake Slides (Brake Pins, whatever they are called).
The short answer is:
Remove the wire clip from the outside of the caliper.
Remove the caps from the inside of the caliper.
Use an allen wrench to remove the bolt/slides from under the caps.
Remove the caliper from the carrier and hang with an S hook.
Remove the pads from the carrier.
Do you live in a salty environment? If so, greasing the slide pins is probably a good idea. If not, I wouldn't worry about it. I always drive in L, so the brakes hardly ever get used.