thanhdaica1985
Posts: 50
Joined: Mon Oct 22, 2018 2:23 pm

DCDC Module Forscan temperature reading

Mon Aug 12, 2019 8:17 am

Hi all, I just want to check to see if it's normal that the MotCoolTemp reading from the DCDC Module is 226 degrees F. That's boiling water temperature. Also there's a lot of inconsistencies temperature reading between the modules. If I go to PCM Module and find the temperature for coolant going to motor, it's like around 100 degrees F. Could anyone look at their car's Forscan values and confirm if this is normal or not? Thanks.

Return to “Technical Discussions”