Hi,
i'm new to this forum and i live in Germany and own a Focus electric MY 2014.
Now i have trouble with the original supplied charging cable (model no. FM58-10B706-CB). This cable is for 230VAC and has a european style "SCHUKO" wall plug.
It seems one of the leads in the cable between the wall plug and the ICCB is broken or has a slack joint and the break is in the strain-relief or 1 or 2cm in front of it, so there is no simple solution for cable replacement.
If i bend the cable somehow, the ICCB goes green, but charging isn't possible because of the higher current.
My question is now, is it possible to open the ICCB and attach another cable?
I removed 8 screws from the bottom but the ICCB seems glued.
Any hints would be greatly appreciated.
Thanks,
Roman
i'm new to this forum and i live in Germany and own a Focus electric MY 2014.
Now i have trouble with the original supplied charging cable (model no. FM58-10B706-CB). This cable is for 230VAC and has a european style "SCHUKO" wall plug.
It seems one of the leads in the cable between the wall plug and the ICCB is broken or has a slack joint and the break is in the strain-relief or 1 or 2cm in front of it, so there is no simple solution for cable replacement.
If i bend the cable somehow, the ICCB goes green, but charging isn't possible because of the higher current.
My question is now, is it possible to open the ICCB and attach another cable?
I removed 8 screws from the bottom but the ICCB seems glued.
Any hints would be greatly appreciated.
Thanks,
Roman