Page 1 of 21

Re: Car will not start

Posted: Tue Dec 26, 2017 11:55 am
by EVA
Carbuff - nothing worse than the day before Christmas eve to have a problem like that. What a pain.

I'm guessing. It sounds more like the 12V battery was low. Even though the lights come on, the radio plays, and all that good stuff - those things will work even if the battery is on the low side. It isn't like the old days with those power hungry tungsten incandescent headlights that took amps of power. All that stuff uses a lot less amperage now.

The key would have been the relays clicking. If when she tried to start the car, if there was either no click or lots of clicking - that would be the main relay not closing. That relay is in the under hood fuse box. I had a low 12V battery that did all the things you described - seemed like the car should run. But in fact there wasn't enough power to pull the main relay closed and it would just click like crazy.

Others have said it before - one of those lithium ion jumper batteries and a USB adapter for the 12V power outlet with a Voltage readout will get you out of a lot of trouble.

The car probably started on its own because the 12V battery got up to a critical voltage that worked. The rain and the extension cord had nothing to do with charging. The rain did have something to do with the 12V battery getting low - windshield wipers, maybe defroster and heater just hit it a little extra hard.

(If you're still on your original 12V battery and this is the 2013 in your signature, probably time to replace the battery).

I'm just guessing though.

Re: Car will not start

Posted: Wed Dec 27, 2017 10:30 pm
by EVA
The 12V adapter might not be familiar. This is just an example, I did a quick search for them. I have some other brand that I couldn't find. ... 01M9IKYVH/

Re: Car will not start

Posted: Thu Dec 28, 2017 12:57 pm
by triangles
The "hybrid battery contactor circuit" error means there is something wrong with the HVB contactors. This is basically the relay(s) that disconnects the HVB when the car is off. You probably shouldn't have cleared that error and let ford fix it under warranty. I am guessing that once that fault is recorded the computer won't let the contactor be energized again to prevent the risk of further damage/fire. I have no knowledge of how this system is on the FFE but I have worked with 480V industrial contactors and they are not something to be trivialized. I had one go poof on me when I was troubleshooting. Luckily other than the dead contactor nothing was damaged except maybe my underwear. A dirty or arc damaged contactor can cause excess heat leading to things melting and a potential fire. The contacts can also end up welding together so they can't turn off (I would hope ford has some redundancy built in here). I hope you are lucky and it was just a glitch. If there really is an issue with your HVB contactors that error will come up again. When it does I'd let ford tow it in and replace whatever is faulty.

Re: Car will not start

Posted: Mon Jan 01, 2018 2:23 am
by meghabadal33010
I am experienced with same and the reason is Frozen fuel line so, please check your fuel line.

Re: Car will not start

Posted: Mon Jan 01, 2018 5:49 am
by spirilis
Thought I was reading the C-Max energi forum for a sec but the forum color scheme wasn't quite right...

Yeah frozen fuel line probably isn't it ;-)